Saturday, July 28, 2012

CR Magnetics CR4620-500 Loop Powered AC Voltage Transmitter with Single Element, 20 Hz - 5 KHz, 0 - 300 Load, 24 VDC, 0 - 500 VAC Input Range, 4 - 20 mADC Output Range

!9#CR Magnetics CR4620-500 Loop Powered AC Voltage Transmitter with Single Element, 20 Hz - 5 KHz, 0 - 300 Load, 24 VDC, 0 - 500 VAC Input Range, 4 - 20 mADC Output Range

Brand : CR Magnetics
Post Date : Jul 28, 2012 23:00:03
Usually ships in 24 hours

The CR4620 series, loop-powered AC voltage transmitters are designed to provide a 4 - 20 mA DC output that is proportional to the average RMS AC voltage input. These devices are best suited for general applications, such as fixed frequency voltage supplies. Response time: 250 ms. MTBF: greater than 100 K hours. Operating temperature: 0 degree C to +50 degree C. Output load: 0 - 300 ohm. Frequency range: 20 - 5 KHz. Loop voltage: 24 VDC. Power source: Loop powered. Insulation voltage: 2500 VDC. Thermal drift: 500 PPM/ degree C. Calibration: average sensing, RMS Calibrated. Basic accuracy: 0.5 percent. Polution degree: 2. Installation category: CAT II. Altitude: 2000 meter max. Cleaning: water-dampened cloth. Relative humidity: 80 percent for temperatures up to 31 degree C and decreasing linearly to 50 percent at 40 degree C. Torque specs.: 3.0 inch lbs. (0.4Nm).

Disclaimer : This site/page does not included in any the parts with amazon.com but it is participant in the amazon services LLC associates program by advertising and linking to amazon.com , Certain content that appears on this site comes from amazon services LLC. This content is provided 'as is' and is subject to change or removal at any time.

Decrease Infocus Interactive Proj Sys 3000 Lms Xga Dlp - In3902lb R... Vanguard Alta Pro 264at Tripod... Decrease Atlantic City Junkets Order Now

Tuesday, July 24, 2012

Furuno 525T-PWD Plastic TM Transducer w/Temp, 600W (10-Pin)

!9#Furuno 525T-PWD Plastic TM Transducer w/Temp, 600W (10-Pin)

Brand : Furuno
Post Date : Jul 24, 2012 17:48:04
N/A

Plastic Transom Mount Transducer w/ Temp, 600w (10-Pin)600 Watts 50/200 kHz 40/10 degree Beam Angles Plastic Transom Mount with Temperature 30 Foot Cable with 10-Pin Connector Beam Width 40°Cable Length (Feet) NONEFairing Block Included NONEPins NONE

Live Wire Instrument Cable Black And Tweed 18.5 Foot... Help Brembo Bdr27073 Brake Rotor... Purchase

Saturday, July 21, 2012

CR Magnetics CR5220-100 DC Hall Effect Current Transducer with Single Element, DC, 0 - 300 Output Load, 24 VDC +/-10%, 0-100 ADC Input Range, 4 - 20 mADC Output Range

!9# CR Magnetics CR5220-100 DC Hall Effect Current Transducer with Single Element, DC, 0 - 300 Output Load, 24 VDC +/-10%, 0-100 ADC Input Range, 4 - 20 mADC Output Range

Brand : CR Magnetics | Rate :

| Post Date : Jul 21, 2012 03:19:10 | Usually ships in 24 hours

CR Magnetics CR5220-100 DC Hall Effect Current Transducer with Single Element, DC, 0 - 300 Output Load, 24 VDC +/-10%, 0-100 ADC Input Range, 4 - 20 mADC Output Range

Non-contact DC current sensing
Closed loop sensing for accuracy
4 - 20 mA outputs
Connection diagram printed on case
35 DIN rail or panel mount

More Specification..!!

CR Magnetics CR5220-100 DC Hall Effect Current Transducer with Single Element, DC, 0 - 300 Output Load, 24 VDC +/-10%, 0-100 ADC Input Range, 4 - 20 mADC Output Range

Review Solid And Durable Children Kids Table And 2 Chair Set... Mystic: Dragon Of Fire... Increase How To Prevent 2 Battery Charger For Kodak Klic-7004 V1073 V1233 V1253...

Tuesday, July 17, 2012

NK Technologies ATR2-420-24L-FT RMS Current Transducer, Solid-core, Top Term, 4-20mA Output Range, 0-100, 0-150, & 0-200A Input Range, 12-40VDC Power Supply

!9#NK Technologies ATR2-420-24L-FT RMS Current Transducer, Solid-core, Top Term, 4-20mA Output Range, 0-100, 0-150, & 0-200A Input Range, 12-40VDC Power Supply

Brand : NK Technologies
Rate :

Post Date : Jul 17, 2012 18:20:04
Usually ships in 24 hours

Kuchenprofi Stainless Steel Mesh Oyster Glove... Votes Mtech Knives Right Now Mini City Jogger Stroller Compare

Saturday, July 14, 2012

CR Magnetics CR4510-250 True RMS AC Voltage Transducer with Single Element, 20 Hz - 5 KHz, >= 2K Output Load, 24 VDC +/-10%, 0-250 VAC Input Range, 0 - 5 VDC Output Range

!9#CR Magnetics CR4510-250 True RMS AC Voltage Transducer with Single Element, 20 Hz - 5 KHz, >= 2K Output Load, 24 VDC +/-10%, 0-250 VAC Input Range, 0 - 5 VDC Output Range

Brand : CR Magnetics
Rate :

Post Date : Jul 14, 2012 15:45:04
Usually ships in 24 hours

The CR4510 series, true RMS voltage transducers and transmitters are designed for applications where AC voltage waveforms are not purely sinusoidal. More precise and accurate than other devices, these units are ideal in chopped wave and phase fired control systems. Thermal drift: 500 PPM/ degree C. Output Load: 0-5 VDC - 2 K or greater. Supply voltage: 24 VDC +/-10 percent. Insulation voltage: 2500 VDC. Response time: 250 ms. Operating temperature: 0 degree C to +50 degree C. Calibration: true RMS sensing. Basic accuracy: 0.5 percent. 4-20 mA DC - 0 - 300 ohm Output. MTBF: greater than 100 K hours. Frequency range: 20-5 KHz. Installation category: CAT II. Polution degree: 2. Altitude: 2000 meter max. Cleaning: water-dampened cloth. Relative humidity: 80 percent for temperatures up to 31 degree C and decreasing linearly to 50 percent at 40 degree C. Supply current: Typical 15mA, Max 25mA. Torque specs: 3.0 inch lbs. (0.4Nm).

Guest Bluewater Cruising Series Battery Chargers 2622a 20 Amp 2 Output... Eliminate Ngk (4768) Fr2a-d V-power Spark Plug, Pack Of 1... Save You Money Best Lextra® (aqua-camel), Mouserug®, Aqua And Gold, 10.25" X 7.125", One...

Wednesday, July 11, 2012

CR Magnetics CR4510-150 True RMS AC Voltage Transducer with Single Element, 20 Hz - 5 KHz, >= 2K Output Load, 24 VDC +/-10%, 0-150 VAC Input Range, 0 - 5 VDC Output Range

!9# CR Magnetics CR4510-150 True RMS AC Voltage Transducer with Single Element, 20 Hz - 5 KHz, >= 2K Output Load, 24 VDC +/-10%, 0-150 VAC Input Range, 0 - 5 VDC Output Range

Brand : CR Magnetics | Rate :

| Post Date : Jul 12, 2012 00:19:03 | Usually ships in 24 hours

Connection diagram printed on case, DIN rail mount or panel mount
Highest precision available, 24 VDC powered
Outputs isolated from inputs
Available with 0-5 VDC outputs
Applications: Chopped waveform drivers, phase fired controlled devices, quickly varying voltage supplies, harmonic voltages

Best Buy Sealed Power E-350x Economy Piston... Sassy Secrets Lace Wigs Quickly

Sunday, July 8, 2012

CR Magnetics CR5211-10 DC Hall Effect Current Transducer with Single Element, DC, >=2K Output Load, 24 VDC +/-10%, 0-10 ADC Input Range, +/-10 VDC Output Range

!9#CR Magnetics CR5211-10 DC Hall Effect Current Transducer with Single Element, DC, >=2K Output Load, 24 VDC +/-10%, 0-10 ADC Input Range, +/-10 VDC Output Range

Brand : CR Magnetics
Rate :

Post Date : Jul 08, 2012 06:00:07
Usually ships in 24 hours

The CR5200 series, DC hall effect current transducers are designed to output a DC signal which is proportional to a DC current input signal. These devices are designed for direct current only, targeting them towards general and daily applications. Applications: power supply management, DC motor drives, battery chargers and systems, mobile applications. Thermal drift: 500 PPM/C. Calibration: RMS. 4-20 mA DC - 0-300 ohm Output. Operating temperature: 0 degree C to +50 degree C. Response time: 250 ms. Insulation voltage: 2500 VDC. MTBF: Greater than 100 K hours. Supply voltage: 24 VDC. Frequency range: DC. Output load: 0-5 VDC - 2 K or greater. Basic accuracy: 1.0 percent. Torque specs: 3.0 inch lbs (0.4Nm).

How To Remove Marks/mundial M455 Scissor...